Ctrlk
For the complete documentation index, see llms.txt. This page is also available as Markdown.
Add NetworkBNB Network

How to Add Networks to Your ELLIPAL Titan 2.0 and X Card？

Learn how to add networks and coins to your ELLIPAL Titan 2.0 or X Card and sync them to the ELLIPAL App. Supports all major blockchains including Bitcoin, Ethereum, and more.

This guide shows you how to add blockchain networks to your ELLIPAL device and sync them to the ELLIPAL App. The process differs slightly between Titan 2.0 and X Card — choose your device below.

How to Add Networks

On Titan 2.0, adding a network requires a QR code sync with the ELLIPAL App to take effect.

  1. On your Titan 2.0, tap Add Networks

  2. Enable the network you want to add

  3. Enter your password and tap Confirm — the network is added on the device

  4. Tap Connect to App

  5. The connection QR code appears on the Titan 2.0 screen

  6. Open the ELLIPAL App and tap Scan

  7. Scan the QR code shown on the device

  8. The network is now added and visible in the app

What Can Go Wrong

What if the network I want is not available?

First, check whether the network is supported on ELLIPAL's coin list. If it is listed but not showing on your device, update your firmware and ELLIPAL App to the latest version, then check again.

How to Confirm It Worked

After completing the steps above, the network you added should appear in your account view in the ELLIPAL App. Always verify the network name matches your intended destination before confirming any transaction.

FAQ

How do I add networks to my ELLIPAL Titan 2.0?

On your Titan 2.0, tap Add Networks, enable the network, enter your password to confirm, then tap Connect to App and scan the QR code with the ELLIPAL App. The network will appear in the app once the scan is complete.

Do I need to reconnect my X Card after adding a network?

No. On X Card, networks are managed in the ELLIPAL App directly. Tap the Manage Network icon, find the network, and tap + to enable it. No QR code sync is needed.

Do I need to re-sync with the app every time I add a network on Titan 2.0?

Yes. On Titan 2.0, every time you add or change networks on the device, you need to tap Connect to App and scan the QR code to sync the changes to the ELLIPAL App.

Related Guides

Token & Network BasicsHow to Manage Networks and Privacy Settings in the ELLIPAL App?
PreviousCommon Crypto Scams Targeting Hardware Wallet UsersNextHow to Add or Remove Tokens in the ELLIPAL App?

Last updated

Was this helpful?